Elprotronic MSP430 - Page 116

Type:
F_Initialization() //initialization with config taken from the config.ini
//setup taken from the FlashPro430 - with defined MSP430 type, code file etc.
Press ENTER - result ->1 (OK)
Type:
F_AutoProgram( 0 )
Press ENTER - result ->1 (OK)
Type:
F_Report_Message()
Press ENTER - result -> displayed the last report message (from the F_Autoprogram(0))
See figure A-1 for result:
Type quit() and press ENTER to close the FP430-commandline.exe program.
Figure A-1
116