Need help?Do you have a question about the ELRO HIS20S and is the answer not in the manual?
Covers multiple users, system arming, zones, and entry/exit delays.
Details quick set, zone lockout, event log, chime, dialers, tamper, and jamming.
Step-by-step guide for setting up the remote control.
Guidance on choosing an optimal location for the Smart Home Box.
Instructions for physically installing the Smart Home Box.
Covers choosing location, installing, setting, and testing contact detectors.
Covers battery insertion, ID emission, mounting, and testing.
Covers initial, installed system, and walk tests.
Tests RF environment, dialers, sirens, and alarms.
Covers user setup, admin/users, passwords, and names.
Configuration for wireless and wired sensor zones.
Sets voice dial, monitor center, remote control, and dial method.
Instructions for Fully Arm, Holiday Arm, and Night Arm.
Instructions for Partial Arm and Disarm modes.
Defines alert actions for Level Panic, Level 1, and Level 2.
Troubleshooting for power, password, detector, remote access, and monitoring station issues.
Troubleshooting for LED, false alarms, movement detection, and event/schedule problems.
Covers multiple users, system arming, zones, and entry/exit delays.
Details quick set, zone lockout, event log, chime, dialers, tamper, and jamming.
Step-by-step guide for setting up the remote control.
Guidance on choosing an optimal location for the Smart Home Box.
Instructions for physically installing the Smart Home Box.
Covers choosing location, installing, setting, and testing contact detectors.
Covers battery insertion, ID emission, mounting, and testing.
Covers initial, installed system, and walk tests.
Tests RF environment, dialers, sirens, and alarms.
Covers user setup, admin/users, passwords, and names.
Configuration for wireless and wired sensor zones.
Sets voice dial, monitor center, remote control, and dial method.
Instructions for Fully Arm, Holiday Arm, and Night Arm.
Instructions for Partial Arm and Disarm modes.
Defines alert actions for Level Panic, Level 1, and Level 2.
Troubleshooting for power, password, detector, remote access, and monitoring station issues.
Troubleshooting for LED, false alarms, movement detection, and event/schedule problems.
General| Placement | Indoor |
|---|---|
| Connectivity | Wireless |
| Batteries Required | Yes |
| Power Supply | Battery |
| Alerts | Siren |
| Installation | Wall mount |
To Next Page
