Need help?Do you have a question about the Elster Instromet RABO G250 and is the answer not in the manual?
General| Meter Type | Rotary Gas Meter |
|---|---|
| Size | G250 |
| Maximum Flow Rate | 400 m³/h |
| Minimum Flow Rate | 2.5 m³/h |
| Operating Pressure | Up to 16 bar |
| Connection Type | Flanged |
| Measurement Principle | Positive Displacement |
| Flow Range | 2.5 to 400 m³/h |
| Accuracy | ±1% |
| Connection Size | DN100 |
| Output Signals | Pulse Output |
| Power Supply | Battery or External |
Illustrates horizontal and vertical installation setups for the meter.
Step-by-step guide for mounting the meter, ensuring proper alignment.
Instructions and precautions for adding lubricating oil to the meter.
How to test meter accuracy using a traceable proving device.
Using differential pressure to monitor meter performance and detect wear.
Details rangeability, start/stop rates, and flow rates at specific DP.
Guide to selecting the correct meter size based on flow and pressure.
Physical dimensions and weights for different RABO meter models.
How to adjust the viewing angle of the index display.
Instructions on interpreting the digits and units shown on the index.
Method to calculate instantaneous flow rate using the index test dial.
Step-by-step guide for replacing the meter's index.
Detailed steps for installing a thermowell into the meter body.
To Next Page
