Need help?Do you have a question about the Elster Instromet TRZ2 and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Nominal Sizes | DN50 - DN300 |
| Temperature Range | -40°C to +60°C |
| Housing Material | Stainless Steel |
| Measurement Range (Velocity) | 0.04 - 65 m/s |
| Accuracy | ±1% of reading |
| Operating Temperature Range | -40°C to +60°C |
| Output Signal | Pulse |
| Material | Stainless Steel |
| Process Connection | Flanged |
Specifies intended use for calibratable and non-calibratable volumetric metering of flammable and non-flammable gases.
Lists gases for which the product is not intended, such as aggressive gases or oxygen.
Details technical specifications for LF and HF pulse generators, including voltage, current, and resistance.
Lists technical specifications for the Absolut ENCODER S1, including digit rollers and safety class.
Warns against cleaning plastic covers with dry cloth due to electrostatic discharge risk.
Ensures protective caps are removed, meter/accessories inspected for damage, and completeness checked.
Describes how LF pulse generators (Type IN-S) are connected to the counter cover for volume pulse output.
Warns that pulse generators are intrinsically safe and require compliant safety barriers for explosive atmospheres.
Explains encoder suitability for connecting to external devices in potentially explosive atmospheres.
Provides instructions for connecting the Absolut ENCODER S1 unit to the meter's mechanical index drive.
Guides on slowly filling the system to operating pressure, pressure rise limits, and conducting tightness tests.
Lists ATEX approvals for LF pulse generators (IN-S, PCB E1, IN-W11) and their respective sensor designations.
Details ATEX approvals for HF pulse generators (A1 R, A1 S) and their associated inductive proximity switches.
To Next Page
