UFM Series 6
Q.Sonic-plus
Operation and Maintenance
1.2 Limitation of Liability
This manual is based on the latest information available. It is provided
subject to alterations. We reserve the right to change the construction and/or
configuration of our products at any time without obligation to update
previously shipped equipment.
The warranty provisions stipulated in the manufacturer's Terms of Delivery
are applicable to the product. The manufacturer shall have no obligation in
the event that:
Repair or replacement of equipment or parts is required through
normal wear and tear, or by necessity in whole or part by
catastrophe, or the fault or negligence of the purchaser;
The equipment, or parts, have been maintained or repaired by
someone other than an authorized representative of the
manufacturer, or have been modified in any manner without prior
express written permission of the manufacturer;
Non-original parts are used;
Equipment is used improperly, incorrectly, carelessly or not in line
with its nature and/or purpose;
Use of this product with unauthorized equipment or peripherals,
including, but not necessarily limited to, cables, testing equipment,
computers, voltage, etc.
The manufacturer is not responsible for the incidental or consequential
damages resulting from the breach of any express or implied warranties,
including damage to property, and to the extent permitted by law, damage
for personal injury.
Read through this Operation and Maintenance manual carefully
before beginning any work.
The manufacturer assumes no liability for loss and malfunctions
that result from non-compliance with these instructions.
To Next Page
Loading...
Need help?
General
