EasyManua.ls Logo

ELT ELT406GPS - Page 43

Default Icon
83 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...


Due to the size of the antenna
, it is questionable if mounting on fabric is a good idea. Depending
on the type of composi
te it is acceptable to mount the antenna on the surface. Care should be
taken to ensure the structural integrity of the site and an electrical ground plane must be
provided.
In order to achieve the proper size ground plane it is important to have radial
from the antenna mounting point at least 24 inches in every direction. Eight (8) radials will be
sufficient. See the example in AC 4313
This information is supplied as approved data.


, it is questionable if mounting on fabric is a good idea. Depending
te it is acceptable to mount the antenna on the surface. Care should be
taken to ensure the structural integrity of the site and an electrical ground plane must be
In order to achieve the proper size ground plane it is important to have radial
conductive material
from the antenna mounting point at least 24 inches in every direction. Eight (8) radials will be
sufficient. See the example in AC 4313
-2A figure 3.2
This information is supplied as approved data.

, it is questionable if mounting on fabric is a good idea. Depending
te it is acceptable to mount the antenna on the surface. Care should be
taken to ensure the structural integrity of the site and an electrical ground plane must be
conductive material
from the antenna mounting point at least 24 inches in every direction. Eight (8) radials will be

Table of Contents