Eltek Delta OP - Page 20

3 How to Operate DELTA OP
20 User’s Guide '(/7$23
+2:723(5)2506<67(07(676
)LUH$ODUP6\VWHP¶V5HVSRQVH <RX&DUU\2XW)ROORZLQJ
l
Fire alarm system is in QRUPDOPRGH —
only the green 3RZHU LED is ON
B F
Unlock '(/7$23 and
press following keys on the keypad:
M (PDLQPHQX)
ì (Test)
 ;
The 7HVWLED indicator is ON and legible
test information is presented in the
graphical display
F
Depending on the test you want to perform, press one
of following keys:
 (Zone Test), or
ó (Detector Test), or
ì (Front Panel Test, LED Test), or
ö (Alarm Circuit Test)
Notice that no menu operations are allowed while the
system is in WHVWPRGH. Exit WHVWPRGH first, if you
want to operate the panel.
;
Legible test information for the test you
have chosen is presented in the graphical
display
F @
Enter on the keypad the device number or the data
specified on the display and verify that the detector
or the device under test is operating properly
For more information about each test, read the test
descriptions below, or turn to chapter "The Operating
Menus
", on page 22.
($/$50) ; (A) (>)
Depending on the test you perform, the
following indicators may be activated:
FIRE
ALARM indicator text is illuminated
Legible test information is presented on the
display
Internal buzzer sounds
If you press the 6,/(1&($/$50key, the
alarms are activated for a short period of
time
Control outputs are not activated
F
To exit WHVWPRGH, press following keys on the
keypad:
M (PDLQPHQX)

(
Correct equipment or functions that are not working
properly; if necessary, call the service engineer
l
Fire alarm system is in QRUPDO PRGH —
only the green 3RZHU LED is ON
B
Lock '(/7$23 again
á For other operating information — such as isolating or de-isolating detector
devices, getting system information, etc. — take a look at chapters "The
Operating Menus", page 22, or "System Information", page 25.