Need help?Do you have a question about the Eltek Delta OP and is the answer not in the manual?
General| Brand | Eltek |
|---|---|
| Model | Delta OP |
| Category | Control Panel |
| Language | English |
Manual provides information for operating the new operating panel and technical system details.
Explains technical terms and provides website for further information.
Highlights the main advantages and capabilities of the DELTA OP panel.
Discusses various uses of the DELTA OP, such as main panel, repeater, or fire brigade panel.
Illustrates the main functional components and connections of the DELTA OP system.
Details the various communication ports (COM1, COM2, DELTA Net) and their capabilities.
Presents examples of how the DELTA OP panel is integrated into compact and distributed systems.
Introduces the operating panel's design, layout, and functional areas.
Explains the function of each key and LED indicator on the DELTA OP panel.
Details the different areas of the graphic display and their information content.
Describes the function of each front key and LED indicator on the DELTA OP.
Describes how the key switch enables or disables panel functions and access levels.
Lists the five possible operational modes of the fire alarm system.
Provides step-by-step instructions for resetting alarms after a situation is controlled.
Explains the normal and fault alarm modes and procedures for addressing faults.
Describes pre-alarm and fire alarm modes and procedures for handling them.
Explains the test mode and the various tests that can be performed.
Outlines procedures for conducting zone and analogue detector tests.
Details how to test panel LEDs and system alarm output circuits.
Introduces the hierarchical menu system for advanced panel operations.
Describes the four access levels for system operation and configuration.
Provides an overview of the user menu structure and navigation.
Explains how to access various system information like version, log, and settings.
Guides on how to check the system's software version for updates.
Explains how to set and verify the system's real-time clock.
Describes how to access and interpret the system's event log.
Explains how to view and reset the system's fire alarm counter.
Details how to adjust detector parameters like analogue values and limits.
Guides on how to read analogue values from detectors for monitoring.
Explains how to view detector data using dynamic histograms.
Provides instructions for adjusting pre-alarm and alarm limits for monitors.
Guides on how to view information about detectors connected to a specific loop.
Explains how to display programmed text descriptions for detectors and loops.
Explains the concept and use of macros for automating frequent operations.
Details programming, using, and activating custom macros for automated tasks.
Explains menu activation and describes factory pre-programmed macros.
Details the programmable communication channels and their applications.
Specifies the input and output types, electrical data, and comments.
Outlines storage, power supply, weight, temperature, and IP rating.
Explains the fundamental principles and components of a fire alarm system.
Defines DELTA Technology and lists its principal features.
Summarizes available manuals, guides, and instructions for the DELTA family.
Explains the HDFA function for hardware detection of fire alarms and brigade output.
Describes the DELTA Net communication system and its use with HDFA.
Introduces DELTA Logic+ for intelligent fire alarm operation and prevention of false alarms.
Explains how to adjust alarm limits and verify detector response time.
Explains the detector function that compensates for environmental influences like dust.
Details the five response modes for Discovery detectors and their selection.
Explains how to assign unique system unit numbers in networked systems.
Lists the address ranges for system units connected to Eltek networks.
Defines fire zones, sub-zones, and provides assignment examples.
Details the address ranges for loop components like detectors on detector loops.
Explains how to use hexadecimal digits for programming numbers above 99.
How to provide feedback on product/manual and make personal notes.
To Next Page