Notes on this manual
ATTENTION! Read this manual very carefully before installing and commissioning the specified module.
This manual is a part of the delivered module. Familiarity with the contents of this manual is required for installing
and operating the specified module.
The rules for prevention of accidents for the specific country and the general safety rules in accordance with IEC
364 must be observed.
The function description in this manual corresponds to the date of publishing.
Technical changes and changes in form and content can be made at any time by the manufacturer without notice.
There are no obligations to update the manual continually.
The module is manufactured in accordance with applicable DIN and VDE standards such as VDE 0106 (part 100)
and VDE 0100 (part 410). The CE marking on the module confirms compliance with EU standards 2006-95-EG (low
voltage) and 2004/108/EG (electromagnetic compatibility) if the installation and operation instructions are fol-
lowed.
Supplier:
Please note: No part of this document may be reproduced or transmitted in any form or by any means -electronic
or mechanical, including photocopying and recording- for whatever reason without the explicit written permission
of Eltek Deutschland GmbH.
Changes and errors excepted.
2014. ELTEK DEUTSCHLAND GmbH. All rights reserved.
To Next Page
Loading...