ELTEX ESR-1000 - ESR-100 and ESR-200 Designs

ESR series routers 7
2.2. ESR-100 and ESR-200 designs
ESR-100 front panel
Figure 2.6 - Front panel of ESR-100
ESR-200 front panel
Figure 2.7 - Front panel of ESR-200
The list of connectors, light indicators and controls that are located on the front panel of ESR-100,
ESR-200 are described in the Table 2.4.
Table 2.4 – Description of connectors, light indicators and controls located on the front panel of ESR-100,
ESR-200
№
Front panel element
Description
1
SD
SD-card connector.
2
USB1, USB2
2 ports for USB-device connection.
3
[1 .. 4]
4 ports for Gigabit Ethernet 10/100/1000 Base-T (RJ-45).
4
Combo Ports
4 ports for Gigabit Ethernet 10/100/1000 Base-X (SFP).
5
Power
Device power indicator.
Status
Currency device indictor.
Alarm
Existence and emergency level indicator of the device.
Fan
Emergency indicator of fans.
6
F
Functional key that reboots the device and resets it to factory settings:
– Pressing the key for less than 10 seconds reboots the device;
– Pressing the key for more than 10 seconds resets the terminal
to factory settings.
7
Console
RS-232 console port for local device control.
8
110-250 VAC
60/50 Hz
max 1A
Power supply.