EasyManuals Logo

elvita CIH4330S User Manual

elvita CIH4330S
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
38
GB
1) Other cooking zones will stay on if they
were already turned on.
2 The red dot next to the power level indi-
cator will light up, indicating that a zone is
selected.
You can use this feature to boil water and it will
remind you that the water is boiling.
Activate the boiling cue function
Touch to select a heating zone.
3.4.8 Using the stop and go control
1. When the cooking zones are turned on, touch the
” control, and all the displays will show ” ” and
stop heating.
The only controls that can be operated now are ”
” and ” ”.
2. Touch ”
” again; the displays will show their
original settings, and the cooking zones will resume
heating.
3.4.9 Using the boiling cue control
Touch the boiling cue control , the zone indicator shows “2L”.
Touch the boiling cue control
again, the zone indicator shows “3L”.
Touch the boiling cue control
for the third time, the zone indicator shows “5L”.
Touch the boiling cue control for the fourth time, the zone indicator shows “0”.
Cancel the boiling cue function
Touch to select a heating zone.
a: Touch the slider control to adjust the
cooking zone to the level you select.
OR
b: Touch the function control
, and the
cooking zone will revert to your selection.
It is important that the water temperature is
neither too hot nor too cold when cooking begins,
as this could aect the nal result.
Once the water has boiled, a series of beeps is
heard and the zone indicator ashes. Press briey
on the boiling cue control
.
Use pans with a diameter that matches the
diameter of the graphic for the selected zone.
Do not use cast iron cookware.
Do not use a lid.
3.4.10 Default working times
Automatic shut-down is a safety protection feature
for your induction hob. It turns o the hob
automatically if you ever forget to turn it o after
cooking. The default working times for various
power levels are shown in the below table:
Power level Keep warm 1 2 3 4 5 6 7 8 9
Default working timer (hour) 8 8 8 8 4 4 4 2 2 2
When the pan is removed, the induction hob can stop heating immediately and the hob
automaticallyswitcheso󰀨after2minutes.
People with a heart pacemaker should consult with their doctor before using
this unit.
Setting more zones
The steps for setting more zones are similar to the
steps for setting one zone.
When you set the time for several cooking zones si-
multaneously, red dots appear for the relevant coo-
king zones. The minute display shows the shortest
timer setting. The dot for the corresponding zone
ashes.
The display appears as below:
(set to 15 minutes)
(set to 45 minutes)
When the countdown timer expires,
the corresponding zone will switch o.
Then it will show the new shortest
time setting and the dot for the
corresponding zone will ash.
The display appears as shown on
the right:
When you touch to select a heating zone, the
corresponding timer will be shown in the timer
indicator.
(set to 30 minutes)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the elvita CIH4330S and is the answer not in the manual?

elvita CIH4330S Specifications

General IconGeneral
Brandelvita
ModelCIH4330S
CategoryHob
LanguageEnglish

Related product manuals