Elvox 8875 - User Manual

Elvox 8875 (Electronic Call)
Terminals
B
1 Speech In (Speaker)
2 Speech Out (Mic)
3 Common (link to 4/5)
6 Call
7 Lock
IMPORTANT NOTE :
1) Before replacing the handset make note of the wires to each terminal on the existing unit (an easy way
is to cut each core off leaving a piece of the insulation in place with colour visible) twist unused cores
together (so you know they are not used, do not short them out).
2) Some older systems will have cable with one coloured core and a solid white core in this case mark
each core with a marker or tape.
3) Some systems may have loop on wiring
, you will have 2 cables into your handset (make sure any joins
remain, as these may be serving other flats on the system).
© 2010 www.intercomsrus.com

Summary

Elvox 8875 Intercom System Overview

Intercom Handset Terminals

Details of the connection terminals for the Elvox 8875 intercom handset.

1 Way Audio System Wiring Diagrams

2 Entrance System Wiring Diagrams

Intercom Handset Variants

Handset Model Applications

Information on various Elvox handset models and their specific system applications.

Elvox 8875 Specifications

General

Caller ID	Yes
Phonebook entries	50
Frequency	1.9 GHz DECT
Range	Up to 300 meters outdoors
Battery Life	Up to 10 hours talk time, 100 hours standby
Number of Handsets	1
Display	LCD