ELWING E1 500 - Installation; Battery Recharge; Powering On

4
1.
RECHARGE THE ELWING BOARD BATTERY BEFORE ITS FIRST
USE.
2.
PUT THE 2 BATTERIES (STANDARD AAA) IN THE REMOTE
CONTROL.
INSTALLATION
2 batteries
Back view
1.
SWITCH ON THE BOARD. THE SWITCH LED WILL FLASH ONCE.
2.
SWITCH THE REMOTE CONTROL ON. THE LED ON THE REMOTE
WILL FLASH BLUE EVERY 3 SECONDES, MEANING THE
REMOTE IS ON.
SWITCH ON
Side view
ONOFF