BATTERY GAUGE
Note: If you need to change to a new remote control,
please synchronize the new one before its first use.
1.
THE SYNC BUTTON IS BLINKING BLUE, MEANING THAT THE
CONNECTION WITH THE BOARD IS SUCCESSFUL.
2.
YOU’RE GOOD TO GO !
Side view
When the board is switched on and connected to
the remote you can check the battery gauge on
the power switch.
Full power
Medium battery
Low battery
Side view
Side view
5
MODE
Note: We recommend to use the SLOW mode for
beginners.
1.
FAST/SLOW: CHOSE YOUR MODE ON THE LEFT SIDE OF THE
REMOTE.
2.
KIDS SAFETY SLOW MODE: THERE IS AN EXTRA BUTTON
INSIDE THE BATTERY COMPARTMENT TO DISABLE THE SLOW
MODE FUNCTION. PULL THE BUTTON TO THE LEFT AND THE
SKATEBOARD SETTINGS WILL BE BLOCKED ON SLOW MODE
WITH SMOOTH ACCELERATION, SMOOTH BRAKING AND
SLOWER MAX SPEED.
To the Left To the Right
Kids Safety slow
Mode
Unlock fast Mode
Fast
Slow
Back view
To Next Page
Loading...
