25
EMS Series User Manual
www.emacoustics.co.uk
EMS-215
Enclosure Type: Dual driver quasi-bandpass
Dimensions (HxWxD, mm/ins): 823/32.4 x 516/20.3 x 700/27.6 (excl. wheels)
Net Weight: 65kg
Frequency Response (+/- 3dB): 45Hz – 150Hz
Sensitivity: 100dB, 1W/1m
Drive Units: 2 x 15” (381mm) LF cone drive unit
Power Handling: 800W RMS, 1600W Program
Maximum SPL: 131dB continuous, 137dB peak
Nominal Impedance: 4 ohms
Crossover: Active, recommended below 150Hz
Connectors: 2 x Neutrik Speakon
TM
NL4MPR
Enclosure: 18mm (3/4”) Finnish Birch plywood
Rigging/Suspension: 3 x 35mm polemount sockets
Grille: Acoustically transparent black foam on expanded steel mesh
Options: Colours
Connectors
EMS-215i (install version)
Spares & Accessories: DU-1501 replacement LF drive unit
RK-1501 re-cone kit for DU-1501
RFG-215 replacement foam/grille
To Previous Page
Loading...
Need help?
General