Capacitive proximity sensors can sense metals and non-metals, such
as wood, ceramics, water, oil, and etc. They are mainly used to detect
liquids, solids in funnels, storage tanks, and granaries.
3
www.ema-electronic.com
M-CX-EN-V1.9
Capacitive Proximity Sensors
Manual
CA/CB/CC Type
■ English
1. There are two ways of mounting the sensor: flush and non-flush,
depending on the surrounding condition.
2. No-contact mounting, can sense through plastic tank or pipe for
level detection and be used as liquid level sensor or leakage sensor.
UL Markings - Please follow the instruction as below:
a. “Maximum Ambient Temperature 40°C”.
b. Type 1 enclosure rating.
c. *Maximum rating of the overcurrent protection maximin 1 A,
minimum 36 V dc or equivalent statement for model IA and IB.
d. *Maximum rating of the overcurrent protection maximin 5 A,
minimum 36 V dc or equivalent statement for model CA and CB.
IP67
To Next Page
Need help?
General
