Need help?Do you have a question about the EMAK BERTOLINI 400 and is the answer not in the manual?
Provides general guidance on operating the machine and avoiding accidents.
Covers precautions for vibrations, general use, electrical fields, regulations, manual handling, and specific operating hazards.
Instructions for mounting the wheels onto the hub shafts of the rotary cultivator.
Instructions for attaching the protective flap to the cutter mechanism hood.
Instructions for mounting the ballast weight to the underside of the engine.
Details how to adjust the handlebar height for optimal operator comfort and control.
Provides critical warnings and instructions for safely handling gasoline and fuel mixtures.
Step-by-step guide on how to safely fill the fuel tank, including safety warnings and precautions.
Provides instructions for checking and maintaining the engine oil level for proper lubrication and to prevent damage.
Warns against wrapping the starter cord around the hand to prevent injury.
Instructs on correct positioning and setting the switch/throttle for safe engine startup, referencing the engine manual.
Explains how to operate the lever for driving wheels and rotor, including safety lock.
Details how to operate the lever for driving the wheels, including the safety lock.
Explains how to engage reverse gear using the respective levers and safety lock.
Instructions on how to adjust the working depth of the central blade for optimal soil tillage.
Defines the intended agricultural applications and lists forbidden uses to ensure safety and proper operation.
Warns about potential hazards from contact with foreign objects, walls, or entanglement of cutting tools.
Advises consulting an expert or authorized service for uncertain operating situations.
Details important precautions regarding engine speed, keeping clear of moving parts, lifting, and shutting down the engine.
Emphasizes not to tamper with any of the safety devices on the machine.
States that the machine should not be used if safety devices are not functioning correctly.
Explains the device that prevents simultaneous activation of propulsion and reverse gear.
Describes the lever that allows simultaneous operation of wheels and rotor for safety.
Warns about the neutral transmission state and not leaving the machine on slopes after stopping the engine.
Checks the cutting attachment and PTO to ensure they do not move when disengaged.
Guides on safe machine movement, speed, and obstacle avoidance.
Prohibits driving the machine on public roads or towing it, and outlines transport requirements.
Outlines essential safety steps and general advice before performing any maintenance tasks.
Advises against modifying the carburetor due to emission law violations.
Warns about the tension of the starter coil spring and not disassembling it.
Provides instructions for the proper disposal of used motor oil and the oil change procedure.
Details how to check and change the transmission oil, including recommended oil types and intervals.
Instructions for checking tire pressure and warnings about overinflation.
Provides guidance on cleaning the machine using compressed air or water jets.
Recommends periodic inspection by a specialized technician and using original replacement parts.
Details steps for preparing and storing the machine for extended periods to ensure its condition.
Information on how to properly dispose of the machine and its materials, emphasizing environmental responsibility.
Specifies the engine type, power, and transmission details, including the gearbox type.
Lists the maximum overall dimensions, weight, rotor cutting depth, and width of the machine.
Details the machine's speed in different gears, engine RPM, measured and guaranteed sound power levels, and vibration data.
Covers problems related to engine starting, acceleration, speed, and idling.
Addresses premature wear of components, noise, and abnormal vibrations.
Outlines the general terms and conditions of the product warranty, including exclusions.
To Next Page
General
