EMAK K500 User Manual (English)

Questions and Answers:

J
Jennifer DavisAug 14, 2025
How to fix EMAK K500 Engine that will not start?
- C
  Christopher HughesAug 14, 2025
  If your EMAK Engine won't start, several factors could be the cause. First, ensure the choke lever is in the CLOSE position unless the engine is warm. Check the fuel level and refuel if necessary. Bad fuel can also be a culprit; drain the fuel tank and carburetor, then refuel with fresh gasoline. Inspect the spark plugs for faults, fouling, or improper gaps, and gap or replace them as needed. If the spark plugs are wet with fuel, dry and reinstall them, then start the engine with the control lever in the FAST position. For more complex issues like a clogged fuel filter, carburetor malfunction, or a stuck valve, replace or repair the faulty components.
E
Emily SmithAug 18, 2025
Why does my EMAK K500 lack power?
- K
  kellymartinAug 18, 2025
  If your EMAK Engine lacks power, start by checking the filter elements for clogs and clean or replace them as needed. Ensure you have sufficient fuel by refueling. Old or contaminated fuel can also cause power loss; drain the fuel tank and carburetor, then refuel with fresh gasoline. If these steps don't resolve the issue, there may be a fuel filter clog, carburetor malfunction, or another issue requiring you to replace or repair the faulty components.
B
Brandon WhiteAug 21, 2025
What to do if EMAK K500 Engine spark plugs are wet with fuel and it will not start?
- P
  pattersonchelseaAug 21, 2025
  If the spark plugs in your EMAK Engine are wet with fuel, dry and reinstall them. Then, start the engine with the control lever in the FAST position.
D
Debra MendezAug 25, 2025
What to do if EMAK K500 Engine is out of fuel and lacks power?
- T
  Thomas BerryAug 26, 2025
  If your EMAK Engine lacks power and is out of fuel, the solution is to refuel it.
A
Ashley RomeroAug 28, 2025
What to do if EMAK Engine has bad fuel and will not start?
- C
  christopherwyattAug 28, 2025
  If your EMAK Engine won't start due to bad fuel (engine stored without treating or draining gasoline, or refueled with bad gasoline), drain the fuel tank and carburetor. Then, refuel with fresh gasoline.
D
denise09Aug 31, 2025
How to fix EMAK K500 lacking power due to bad fuel?
- N
  Natalie MillerAug 31, 2025
  To fix an EMAK Engine lacking power due to bad fuel, drain the fuel tank and carburetor. After that, refuel it with fresh gasoline.
A
Angela MolinaSep 3, 2025
What if the EMAK Engine choke is open and it will not start?
- S
  Shane RothSep 4, 2025
  If your EMAK Engine doesn't start and the choke is open, move the lever to the CLOSE position unless the engine is warm.
S
Stephanie TaylorSep 6, 2025
What to do if EMAK Engine spark plugs are faulty and it will not start?
- A
  Amanda PattersonSep 7, 2025
  If your EMAK Engine won't start and the spark plugs are faulty, fouled, or improperly gapped, gap or replace the spark plugs.
T
Tyler NavarroSep 10, 2025
How to fix EMAK K500 lacking power due to clogged filter elements?
- C
  Casey HartSep 10, 2025
  To fix an EMAK Engine that lacks power due to clogged filter elements, clean or replace the filter elements.