Ematic FunTab - Section 2: Initial Setup Charging; Connecting to Wi-Fi

Initial Setup
2.
Connecting to Wi-Fi
Charging
Fully charge your FunTab for 6 hours before the first use.
Select Wi-Fi.
Choose your network and
enter your password.
When connected, tap back.
If you accidently exit
Kid Mode during set-
up, tap the Kid Mode
icon on the desktop to
resume initial setup.
Slide up from the clock
and tap the settings icon.
Use the included 5V
wall charger.
The battery indicator
will show that your
device is charging.
1
2
3
6