FRU Label FRU Label
CL3766
Figure 11 SP power button
Thestoragesystemcantake5-6minutestocompleteitspowerup.
If disk module
s 0-3 shipped separately from your DPE-AX, the system
writes vital i
nformation to those disks during the first powerup. The
process exten
ds the first powerup by 25-30 minutes.
The system fau
lt light on the front of the DPE-AX and the SPS
recharge lig
hts on the rear of the SPS commonly stay on for several
minutes whil
etheSPSfullycharges.
SN:1234ABCD1234ABC
123 BPS
PN:123456789 REV123
SATA
+
-
CL3761
Figure 12 DPE-AX system fault light and SPS recharge light
If any amber lights not related to the SPS recharge remain on for more
than 8-10 minutes, make sure the storage system is correctly cabled.
Most amber lights indicate problems you can solve later, once your
Hardware and Operational Overview
13
To Next Page
Loading...
Need help?
General