EMC Celerra NX4

31
For more information, refer to Celerra Tools on http://Powerlink.EMC.com
This CD contains the intellectual property of
EMC Corporation or is licensed to EMC Corporation
from third parties. Use of this CD and the intellectual
property contained herein is expressly limited to the
terms and conditions of the License Agreement.
EMC® Celerra® NS-960 System
Tuto ria l CD
CSA Installation
P/N nnn-nnn-nnn-A0n
Copyright© 2008 EMC Corporation
All Rights Reserved
Load the Apps & Tools CD in
either a laptop or PC tower.
Network
CNS-001426
Celerra Startup Assistant
Install the Celerra Startup Assistant (CSA)
Before installing the CSA, verify the following requirements:
• Access to the Powerlink website (preferred) or the Celerra Network Server Applications and
Tools CD is available.
• Windows-based client computer is on the same subnet (customer network) as the
Celerra Management Control Station.
• The computer must have at least 100 MB of free space. Internet connectivity
is recommended.
To obtain and install the CSA, perform the following numbered steps:
Note: On your computer, disable any fi rewall software, pop-up blockers, virtual private network
(VPN) interfaces, and VMware
network interfaces before running the CSA.
1. Download the CSA from a link on the Celerra Tools page of the Powerlink website. If you
do not have access to the Powerlink website, insert the Celerra Network Server
Applications and Tools CD into your computer.
2. In the EMC Product Installation window, click Celerra Startup Assistant to install the
CSA on your computer.