2
Parts Checklist for Basic Configuration
Before you start, be sure you have the necessary materials available.
Most required parts were provided with your system, but some are
shipped with particular components (and configurations) and others
are shipped separately.
❑ One or more DAE2 disk enclosures
❑ EMC-approved disk drives
For a list of supported RAID disks, refer to the EMC Storage Systems
CX-Series Disk and Software Matrix (P/N 014003111), available on the
Powerlink website.
❑ If your DAE2 is not already installed in a rackmount cabinet
❑ One or more rails kits, and the
❑ EMC Storage Systems 40U Cabinet Configuration Guide
(P/N 014003082)
❑ Fibre Channel copper cable for connecting the DAE2 to a storage
processor device (1 per connection)
❑ Copper cables for connecting multiple DAE2s to each other
(2 per DAE2)
❑ EMC 2-Gigabit Disk Enclosure (DAE2) Hardware Reference
(P/N 014003048)
❑ If you will use EMC Control Center
™
Navisphere
®
to manage the
DAE2 with an EMC CX-Series storage system
❑ EMC Fibre Channel Storage System CX-Series Configuration and
Planning Guide (P/N 014003113)
❑ EMC ControlCenter Navisphere Manager Revision 6.X
Administrator’s Guide (P/N 069001161)
To Next Page
Loading...