EMC VNX5500 - Page 63

I/O modules
VNX5500 Hardware Information Guide 63
Two-port 1-Gb/s copper plus two-port 1-Gb/s optical I/O module
The two-port 1-Gb/s copper plus two-port 1-Gb/s optical I/O module (labeled 1 GbE on
the latch handle) comes with two copper ports and two optical ports, one power/fault
LED, and a link and activity LED for each port, as shown in Figure 56. The copper ports on
this I/O module can interface at speeds of 10 Mb/s, 100 Mb/s, and 1000 Mb/s (1 Gb/s).
While the optical ports can interface at a speed of 1 Gb/s.
Figure 56 Two-port 1-Gb/s copper plus two-port 1-Gb/s optical I/O module
1 Push button latch handle 5 SFP+ activity LED (left)
2 Power/fault LED 6 RJ-45 (copper) port (two)
3 SFP+ (optical) port (two) 7 RJ-45 link LED (right)
4 SFP+ link LED (right) 8 RJ-45 activity LED (left)
1 2
3
4
5
6
CNS-001755
7
8