EasyManua.ls Logo

EMC VNX5700 - 2 U, 25 (2.5-inch) DAE Rear View

EMC VNX5700
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
74 VNX5700 Hardware Information Guide
Disk-array enclosure
Table 38 describes the 2U, 25 (2.5-inch) DAE and disk drive status LEDs.
2U, 25 (2.5-inch) DAE rear view
On the rear, viewing from top to bottom, a 2U, 25 (2.5-inch) DAE includes the following
hardware components as shown in Figure 63:
Two LCCs (A and B)
Two power supply/cooling modules
Figure 63 Example of 2U DAE with two LCCs and two power supply/cooing modules (rear view)
Table 38 2U, 25 (2.5-inch) DAE and disk drive status LEDs
LED Color State Description
DAE fault (location 2) Amber On Fault has occurred
DAE power (location 3) Blue On Powering and powered up
Off Powered down
Disk drive fault (location 4) Amber On Fault has occurred
Off No fault has occurred
Disk drive on/activity
(location 5)
Blue On Powering and powered up
Blinking Disk drive activity
1 LLC B power supply LED (on, green) 7 LCC B bus ID
2 LCC B power supply fault LED (on, amber) 8 LCC B power and fault LEDs
3 LCC B AC power supply power in (recessed
plug)
9 DAE enclosure ID or address
4 LCC B SAS connector link LED (on, blue) 10 LCC B management (RJ-12) connector to
SPS (not used)
5 LCC B SAS connector (output)
1
1. The SAS connector (output) is labeled with a double diamond symbol.
11 LCC A power supply latch handle
6 LCC B SAS connector (input)
2
2. The SAS connector (input) is labeled with a double circle (dot) symbol.
12 LCC A right latch handle
6 Gb
SAS
X4
#
6 Gb
SAS
X4
#
3
2
4
5
8
11
12
B
A
X4
X4
6
9 10
7
1
VNX-000280

Related product manuals