Disk-array enclosure
VNX5700 Hardware Information Guide 81
with the heaviest component at or close to the bottom of the rack.
If the rack is provided with stabilizing devices, install the stabilizers before mounting or
servicing the DAE in the rack. The
Replacing a DAE
document for the 4U, 60 DAE
provides
more information.
Figure 69 4U, 60 (2.5- or 3.5-inch) DAE (unlocking top, front ring pull latch mechanism and bottom
slide extension release levers)
Figure 70 shows an example of a 4U DAE with the top cover closed.
CL4663
1
1
2
2
To Next Page
Loading...
