What to do if my EMD EXP-103 machine shows error Er0?
If your EMD Stretch Wrapping Systems machine displays error code Er0, it could be due to the EMG button or the control box power cut switch. First, check if the EMG switch is locked and release it. If the issue persists, examine the EMG switch for faults. Also, inspect the control box power cut switch to ensure it is functioning correctly.
Conditions to check before installing the machine for safe and correct operation.
Conditions to ensure good protection for the operator during machine operation.
Technical specifications of the EXP-103 machine, including dimensions and capacities.
Visual representation of the machine's physical dimensions with measurements.
Identifies key components of the pallet stretch wrapping machine.
Step-by-step instructions for assembling the pallet stretch wrapping machine.
Important reminders and checks for proper installation of the tower and control panel.
Visual representation of the machine's control panel layout.
Detailed explanation of each button and function on the control panel.
Instructions for threading the film through the carriage unit.
Details power consumption of machine components and electrical input requirements.
Shows the location of sensors and limit switches within the machine's electrical system.
Illustrates the detailed electrical circuit layout for the EXP-103 machine.
Instructions for adjusting the turntable belt tension.
Lists common machine errors, their causes, and troubleshooting solutions.
Exploded view and part list for the machine's seat assembly.
Exploded view of the machine's tower assembly with numbered parts.
Exploded view of the machine's carriage assembly with numbered parts.
General| Turntable Diameter | 1030 mm |
|---|---|
| Maximum Load Weight | 1000 kg |
| Maximum Wrap Height | 1800 mm |
| Film Width | 500 mm |
| Max Load Height | 1800 mm |
| Max Load Weight | 1000 kg |
To Next Page