Why is the Emec Measuring Instruments sensor measured value unstable?
The sensor measured value may be unstable due to a dirty or damaged electrode. In this case, clean or replace the electrode. Another possible cause is unstable pressure, so check the installation.
What to do if Emec Measuring Instruments has nessun segnale di lettura?
If there is no reading signal, it could be due to insufficient flow into the cell. Check the correct position of the float and, if necessary, open the water flow into the cell. Also, check for proper connection of the wires on the instrument terminal, ensuring the black and red wires are not reversed.
Defines icons used for warnings and important information.
Specifies product use and prohibited applications for safety.
Lists essential safety measures before operation and handling chemicals.
Guidelines for clean areas, waste, and emissions.
Information on ordering spare parts via product label codes.
Instructions for packing and protecting the unit during transport.
Specifies optimal temperature and humidity for storage.
Introduces the ECL Series for free chlorine measurement.
Details the components and diagram of the amperometric cell.
Lists available ECL models and their specific applications.
Lists all items provided in the product packaging.
Explains the electrochemical technique used for chlorine detection.
Crucial safety measures for handling the cell and electrolyte.
Steps for securing the cell and making pipe and electrode connections.
Sequence for installing various probes into the cell.
Steps to set water flow and confirm proper operation via LED.
Safety warnings and detailed steps for replacing the electrode.
Procedure for cleaning the electrode using specific solutions.
Explicit warning against using alcohol for cleaning.
Guidance on calibration frequency and method.
Procedure and safety measures for cell decommissioning.
Requirement for weekly checks of probe reading.
Specifies necessary safety gear for maintenance.
Details maintenance inspections for wiring, cables, and electrodes.
Lists common issues and their resolutions.
Steps for returning the unit for repair, including form submission.
Instructions for proper disposal and recycling of the equipment.
General| Brand | Emec |
|---|---|
| Model | ECL6 |
| Category | Measuring Instruments |
| Language | English |
To Next Page