94
POWER
SUPPLY/CHARGER
SPECIFICATIONS
Connection Green six-pin mini din (male) plug
Lights The power supply/charger has three colored lights that indicate the
conditions below. Each light displays a different color.
Color Condition
Voltage 100-240 VAC, 50/60Hz,
US/UK/EU connection types included
Technical data
Green The battery is fully charged.
Flashing green The battery is nearly fully charged.
Yellow The battery is charging.
Flashing yellow The power supply/charger is not connected
to the 475 Field Communicator.
Flashing yellow and
red
The remaining charge in the battery is low.
Red Charging cannot occur. Contact Technical
Support for more information.
Input voltage 100 - 240 VAC ±10%
Input current 750 mA max.
Standby current 20 mA max.
Input fuse type TES 2A 250 V Timelag
Output voltage 1 0 - 8.3 V
Output current 1 1000 mA max.
Output voltage 2 0 - 9.0 V
Output current 2 1400 mA max.
Output power rating 20 W
Operating temperature 0°C - +40°C
Storage temperature -20°C -+80°C
Measurements [L x B x H] 112 mm x 51.5 mm x 29.5 mm
Total Mass 240 g.
Altitude Up to 2000m
Pollution Degree 2
Installation Category 2
IEC Protection Class Double Insulation
To Next Page
Loading...
