Do you have a question about the Emerson AMS Trex and is the answer not in the manual?
Brand | Emerson |
---|---|
Model | AMS Trex |
Category | Cell Phone |
Language | English |
Pre-operation checks for the Trex unit, including condition and attachment of modules.
Details the two available communication modules and their capabilities.
Information on the rechargeable Lithium-Ion power module, its usage, and maintenance.
How to view and modify unit hardware and application settings like brightness, Wi-Fi, and language.
How to sync data between the Trex unit and AMS Device Manager.
Details on using Upgrade Studio for activating the unit, downloading updates, and managing firmware.
How the Field Communicator application automatically detects connected devices.
Guides users through connecting to devices by asking relevant questions.
How to connect the Trex unit to HART devices at various locations.
How to power and connect to HART devices, including transmitters and positioners.
Connecting to HART devices that are externally powered.
Connecting the Trex unit to FOUNDATION fieldbus devices using lead sets and terminals.
Powering and connecting to FOUNDATION fieldbus devices, including bench setups.
Connecting to FOUNDATION fieldbus devices that are externally powered.
Using the Trex unit to power devices for isolation and verification.
How the Trex unit measures voltage and current in various configurations.
How to power a 2-wire transmitter using the Trex unit.
Powering a 2-wire transmitter and measuring its analog output.
Powering a positioner and controlling its current output.
Explanation of measurement status labels (GOOD, BAD, CHECK) and their criteria.
How to power a FOUNDATION fieldbus device using the Trex unit.
Connecting the Trex unit to externally powered fieldbus segments for measurements.
How to measure DC voltage, noise levels, and fieldbus signal strength.
Common issues and solutions for fieldbus diagnostics.
Common issues and solutions for HART communication problems.