Appendix C
Product certifications
See the AMS Trex Device Communicator website for the latest certificates, declaration of
conformity, and approval information.
Approved manufacturing location
R. STAHL HMI Systems GmbH - Cologne, Germany
Labels
Each Trex unit has a main unit label. An Intrinsically Safe (KL option) Trex unit has another
label on the side. If the Trex unit does not have this label, it is considered non-IS approved.
Certifications and approvals
European directive information - CE compliance
ATEX
(2014/34/EU)
This equipment complies with the ATEX Directive. Applicable standards are
EN 60079-0:2012 / A11:2013 and EN 60079-11:2012
Certification No.: SIRA 16ATEX2171
II 2 G (1GD) Ex ia [ia Ga] [ia Da IIIC] IIC T4 Gb (Ta = -20°C < Ta < +50°C)
0158
Electro Magnetic
Compatibility
(EMC)
2014/30/EU
Tested to the EN 61326-1:2013-07 and ETSI EN 301489-17:2012-09
specification.
Low Voltage
2014/35/EU
Tested to the IEC 61010-1:2010 specification.
RED (2014/53/EU) This equipment is in conformity with the Radio Equipment Directive (RED)
Directive, ETSI EN 300328: 2015-02, and IEC 62209-2: 2010-01 standards.
RoHS (2011/65/
EU)
Product is compliant with the RoHS Directive.
International certifications
IECEx Certification No.: SIR 16.0057
Ex ia [ia Ga] [ia Da IIIC] IIC T4 Gb (Ta = -20°C < Ta < +50°C)
Product certifications
User Guide 191
To Next Page
Loading...
Need help?
General
