Emerson AMS Trex - Copy a HART Configuration; Rename a HART Configuration; Delete a HART Configuration; Favorites

6. Tap Save when you finish editing the parameters.
7. If necessary, enter a new configuration name.
8. Tap OK.
3.15.3 Copy a HART configuration
You can create a copy of a saved configuration.
Procedure
1. In the Field Communicator application, tap HART Offline.
2. Tap Offline Config > Copy.
3. Select the configuration you want to copy, and tap OK.
4. Enter a name for the new copy of the configuration, and tap OK.
5. Tap OK when asked if you want to copy the file.
The configuration is copied and saved to the Trex unit.
3.15.4 Rename a HART configuration
1. In the Field Communicator application, tap HART Offline.
2. Tap Offline Config > Rename.
3. Select the file to rename, and tap OK.
4. Enter a new name for the configuration, and tap OK.
5. Tap OK when asked if you want to rename the configuration.
The configuration is renamed.
3.15.5 Delete a HART configuration
1. In the Field Communicator application, tap HART Offline.
2. Tap Offline Config > Delete.
3. Select the file to delete, and tap OK.
4. Tap OK when asked if you want to delete the file.
The file is deleted.
3.16 Favorites
You can add the most commonly used HART menu items to a list of favorites for quick
access. (This feature is similar to the favorites/bookmark feature in a web browser.) You
can add menus (with submenus), methods, or variables to the favorites. The list of
favorites is specific to a device revision. It does not include items added from multiple
types of devices.
Field Communicator application
User Guide 91