Emerson AMS Trex User Manual

LEDs showing approximately 100 percent chargeFigure 2-9:
A. AC adapter LED. Lights up when the AC adapter is attached to the power module. A green light
indicates the power module is fully charged. An orange light indicates the power module is
charging. No LED indicates the power module is not being charged.
B. Power module LEDs. Each solid green LED indicates approximately 20 percent charge. A blinking
LED indicates the power module is charging within that 20 percent range.
C. Power module button. Press to illuminate the power module LEDs.
2.6.4 View the remaining power module charge
You can check the remaining power module charge from several places.
Procedure
1. Check the charge from the power module.
a. Press the power module button to illuminate the 5 LEDs.
b. View the LEDs. Each solid green LED indicates approximately 20 percent charge.
2. Check the charge from the Trex Home screen.
a. Tap Settings or the status bar at the top of the screen.
b. Tap More > Power Management.
The charge level is displayed.
Related information
LEDs on the power module
AMS Trex Device Communicator overview
User Guide 17

Emerson AMS Trex Specifications

General

Brand	Emerson
Model	AMS Trex
Category	Cell Phone
Language	English