Need help?Do you have a question about the Emerson 5301HxxxxxxxxxxxxxxZZ Series and is the answer not in the manual?
General| Category | Transmitter |
|---|---|
| Measurement Type | Pressure |
| Accuracy | ±0.1% of Span |
| Operating Temperature | -40 to 85°C (-40 to 185°F) |
| Ingress Protection | IP67 |
| Hazardous Area Certifications | ATEX, IECEx, FM, CSA |
| Stability | ±0.1% of URL per year |
| Process Connection | 1/2" NPT |
| Communication Protocol | WirelessHART |
| Range | 0-1000 bar |
| Model | 5301H |
Explains TDR principles, pulse reflection, and distance calculation for level measurement.
Advises considering specific mounting requirements, vessel, and process characteristics.
Details procedures for connecting the transmitter to the tank via flange, loose flange, or threaded connections.
Details power requirements, load limitations, and wiring diagrams for 4-20 mA/HART communication.
Covers external power supply, signal wiring, and connection terminals for HMC.
Details power requirements, connecting fieldbus devices, and wiring diagrams.
Provides system requirements and procedures for configuring the transmitter using RRM.
Details Modbus RTU, ASCII, and Levelmaster communication setups.
Lists device status, errors, warnings, and measurement status messages with actions.
Provides a chart with symptoms, possible causes, and recommended actions for malfunctions.
Covers tools for analyzing measurement signals, echo curves, and adjusting thresholds.
Explains SIS certification and requirements for the Rosemount 5300.
Suggests proof tests for safety functions and provides guidance for selecting appropriate tests.
Details performance specifications including reference conditions, accuracy, repeatability, and temperature effects.
Describes basic configuration parameters like measurement units and tank/probe geometry.
Explains dynamic vapor compensation for high pressure steam applications.
Lists and describes Level Transducer Block parameters.
Lists device errors and their corrective actions.
Description of the AI block and its parameters.
Describes required parameters and channel selection for AI block configuration.
Warns about special precautions for personnel safety during HART to Modbus Converter operations.
To Next Page