Need help?Do you have a question about the Emerson Micro Motion 5700 and is the answer not in the manual?
General| Model | 5700 |
|---|---|
| Type | Transmitter |
| Measurement Principle | Coriolis |
| Enclosure | Aluminum or stainless steel |
| Output Signals | 4-20 mA |
| Communication Protocols | HART |
| Display | Optional LCD |
| Operating/Ambient Temperature Range | -40 to 60 °C (-40 to 140 °F) |
| Materials of Construction | Stainless steel |
| Enclosure Rating | IP67 |
| Hazardous Area Approvals | ATEX, IECEx |
| Diagnostics | Comprehensive diagnostics available |
Defines hazard symbols and their meaning for safety warnings.
Specifies the electrical power specifications and voltage/current needs.
Guides for connecting remote-mount transmitters to their sensors.
Explains proper grounding procedures for the transmitter and sensor.
Instructions for wiring the analog mA current output.
Detailed wiring for mA and HART communication outputs.
Wiring for internally powered mA/HART output.
Wiring for externally powered mA/HART output.
Guidance for wiring the frequency output signals.
Instructions for wiring the discrete output signals.
Instructions for wiring the analog mA current input.
Instructions for wiring the discrete input signals.
Specific wiring for SIS applications using Channels A and D.
To Next Page
