Emerson Micro Motion 5700 User Manual

1 Before you begin
1.1 About this document
This manual provides information on planning, mounting, wiring, and initial setup of the
Micro Motion 5700 transmitter. For information on full configuration, maintenance,
troubleshooting, or service of the transmitter, see the Configuration and Use Manual.
The information in this document assumes that users understand basic transmitter and
sensor installation, configuration, and maintenance concepts and procedures.
1.2 Hazard messages
This document uses the following criteria for hazard messages based on ANSI standards
Z535.6-2011 (R2017).
DANGER
Serious injury or death will occur if a hazardous situation is not avoided.
WARNING
Serious injury or death could occur if a hazardous situation is not avoided.
CAUTION
Minor or moderate injury will or could occur if a hazardous situation is not avoided.
NOTICE
Data loss, property damage, hardware damage, or software damage can occur if a
situation is not avoided. There is no credible risk of physical injury.
Physical access
WARNING
Unauthorized personnel can potentially cause significant damage and/or
misconfiguration of end users' equipment. Protect against all intentional or
unintentional unauthorized use.
Physical security is an important part of any security program and fundamental to
protecting your system. Restrict physical access to protect users' assets. This is true for
all systems used within the facility.
1.3 Related documentation
You can find all product documentation on the product documentation DVD shipped with
the product or at Emerson.com.
See any of the following documents for more information:
• Micro Motion 5700 Product Data Sheet
Installation Manual Before you begin
MMI-20027478 April 2022
Installation Manual 5

Emerson Micro Motion 5700 Specifications

General

Brand	Emerson
Model	Micro Motion 5700
Category	Transmitter
Language	English