10 Available service port connection
Use the service port connection to download or upload data from/to the transmitter.
To access the service port, you can use commonly-available USB hardware, such as a USB
drive, or USB cable.
WARNING
If the transmitter is in a hazardous area, do not remove the housing cover while the
transmitter is powered up. Failure to follow these instructions can cause an explosion
resulting in injury or death.
The service port connection is located under the Service Port warning flap at the wiring
access points.
Installation Manual Available service port connection
MMI-20027478 April 2022
Installation Manual 55
To Next Page
Loading...
