Need help?Do you have a question about the Emerson 810-3072 and is the answer not in the manual?
General| Brand | Emerson |
|---|---|
| Model | 810-3072 |
| Category | I/O Systems |
| Language | English |
Details the MultiFlex 16 input board, its features, and connectivity.
Explains MultiFlex boards with combined input/output capabilities, models, and features.
Covers the 24VAC power requirements for MultiFlex boards and compatible transformers.
Explains power wiring for combination I/O boards, differentiating between new and old styles.
Specific wiring instructions for new-style combination I/O boards with isolated power.
Wiring guidelines for old-style combination I/O boards without isolated power.
Explains how to configure the I/O network using a daisy-chain topology.
Explains the importance and method of assigning unique network ID numbers to boards.
Covers compatible sensors, general input capabilities, and wiring.
Provides a three-step process for wiring sensors to input points on MultiFlex boards.
Explains the basic wiring of sensor signal and ground to input terminals.
Guides on setting input type dip switches based on sensor signal output.
Introduces Form C relay contacts and their three-terminal wiring.
Explains how fail-safe dip switches control relay output behavior during normal and fault conditions.
Describes the analog outputs (0V-+10VDC) provided by specific MultiFlex models.
Covers the digital outputs on the 168DO board, their signal type, and current rating.
Details the Code A and Code B LEDs, which indicate specific failure conditions and their rates.
Introduces the HHT interface for viewing status and performing basic configurations.
To Next Page
