Need help?Do you have a question about the Emerson Keystone OM1 - EPI2 and is the answer not in the manual?
General| Brand | Emerson |
|---|---|
| Model | Keystone OM1 - EPI2 |
| Category | I/O Systems |
| Language | English |
Details the functionalities of the OM1 Modulating I/O module for EPI2 actuators.
Information regarding the manufacturer as per Machinery Directive 98/37.
Step-by-step guide for assembling the OM1 module on older 63-125 Nm EPI2 actuator models.
Procedure for fitting the OM1 module to older 250-500-1000-2000 Nm EPI2 actuator models.
Guide to install the OM1 module on newer 63-125 Nm EPI2 actuator models.
Instructions for installing the OM1 module on newer 250-500-1000-2000 Nm EPI2 actuator models.
Describes how to configure OM1 module settings locally using the control panel.
References the default general settings for the OM1 module as per Table 1.
Details the process and tools for setting OM1 module parameters and functionalities.
Configures the input signal type (4-20 mA or 0-10 V DC) for the OM1 module.
Configures the output signal type (4-20 mA or 0-10 V DC) for the OM1 module.
Details the settings for the four auxiliary relays (AUXC1-AUXC4) for specific output percentages.
Configuration of the dead band parameter for actuator control precision.
Mandatory setting for enabling the positioner feature with analog input.
Information on using the optional Bluetooth module for remote configuration.
Lists the failures indicated by the monitor relay, such as input errors or hardware malfunctions.
Lists the components included in the OM1 modulating input/output module kit.
Explains power connections, remote commands options, and output contact ratings in the OM1 wiring diagram.
To Next Page
