To Next PageTo Next PageWhat to do if all four lamps will not illuminate on my Emerson CF955BS 00?
If all four lamps on your Emerson Fan are not illuminating, it could be due to: * The remote control transmitter battery needing replacement. Replace the 12 V battery; recommended replacement 12V batteries are Duracell MN21, Eveready A23, and GP23A. Warning: Make sure main power is turned off. * The 1.0 amp lamp fuse may have blown and needs replacement.
Why is my Emerson CF955BS 00 not starting?
Your Emerson Fan might not be starting due to several reasons: * A blown fuse or circuit breaker. Check both the main and branch circuit fuses or circuit breakers. * Loose power line connections to the fan or loose switch wire connections in the switch housing. Ensure that the line wire connections to the fan and the switch wire connections in the switch housing are secure. Warning: Make sure main power is turned off. * The remote control transmitter battery may need replacement. Check that the remote transmitter battery is in good condition; the red indicator will illuminate when the key pad buttons are depressed.
Why is my Emerson CF955BS 00 so noisy?
An Emerson Fan can sound noisy for several reasons: * Blades not attached to fan. Attach blades to fan before operating. * Screws securing fan blade flanges to motor are loose. Check to make sure the screws which attach the fan flanges to the motor are tight. * Screws holding blades to flanges are loose. Tighten screws securely. * Glass bowl loose. Tighten the glass bowl securely.
Why is my Emerson Fan wobbling excessively?
Excessive wobbling in your Emerson Fan can be due to: * A loose setscrew in the motor coupling. Raise the coupler cover and tighten the setscrew securely. * A loose setscrew in the hanger ball/downrod assembly. Tighten the setscrew in the hanger ball/downrod assembly. * Loose screws securing fan blade flanges to the motor. Check to be sure the screws which attach the fan blade flanges to the motor are tight. * Fan blade flanges not seated properly. Check to be sure the fan blade flanges seat firmly and uniformly to the surface of the motor. * The hanger bracket and/or ceiling outlet box is not securely fastened. Tighten the hanger bracket screws to the outlet box, and/or secure the outlet box. * Fan blades out of balance. Interchanging an adjacent (side-by-side) blade pair ca...
General| Brand | Emerson |
|---|---|
| Model | CF955BS 00 |
| Type | Ceiling Fan |
| Finish | Brushed Steel |
| Blade Span | 52 inches |
| Fan Width | 52 inches |
| Number of Blades | 5 |
| Reversible | Yes |
| Blade Finish | Walnut |
| Light Included | No |
| Remote Control Included | No |
| Motor Type | AC |
| Light Kit | Compatible |
| Blade Material | Wood |
| Warranty | Limited Lifetime |
Details what the warranty covers for motor, light fixture housing, electronics, and other components.
Specifies coverage duration for motor (30 years), light fixture/electronics (2 years), and other parts (1 year).
Explains Emerson will replace or refund defective parts; customer pays shipping.
Instructs users to contact Emerson or authorized center with proof of purchase.
Lists exclusions like glass, bulbs, unauthorized repairs, misuse, and moving the fan.
Mentions state-specific rights regarding incidental/consequential damages.
General advice for safe operation, cleaning, and maintenance of the ceiling fan.
Specific safety guidelines for electrical wiring, mounting, and fan placement during installation.
Lists necessary tools, materials, and wire gauge requirements for fan assembly and installation.
Provides steps for unpacking fan components and checking for completeness.
Details attaching the hanger ball and downrod to the motor coupling, securing with clevis pin and setscrew.
Instructions for cutting and stripping fan motor lead wires to the appropriate length.
Steps for attaching fan blades to the motor and connecting the lower housing assembly.
Specifies voltage, amperage, and outlet box requirements for safe fan operation.
Mandates a minimum clearance of 7 feet from the floor to the fan blades for safety.
Instructions for securely attaching the hanger bracket to the outlet box.
Details connecting fan wires to supply wires, including grounding, neutral, and hot connections.
Steps for installing fluorescent bulbs and the glass globe into the fan housing.
Explains the preset memory feature for light and fan speed settings.
Guides on how to set the transmitter frequency for optimal remote operation.
Steps to program the ceiling fan receiver to the remote transmitter frequency.
How to select fan speeds (1-5) using the remote control buttons.
Instructions for turning the light on/off and adjusting brightness levels.
How to reverse the fan's blade direction using the remote control.
Addresses issues like blown fuses, loose connections, or battery replacement.
Solutions for noisy fans due to loose screws or unbalanced blades.
Fixes for wobbling, including checking setscrews, blade seating, and balance.
Troubleshoots issues with lamps not lighting up, like battery or fuse problems.
Guidelines for periodic cleaning using a soft cloth to maintain the fan's finish.
Mentions the availability of downrod extension kits and warns against unapproved controls.
Illustrates all individual parts of the ceiling fan with corresponding key numbers.
A detailed table listing all repair parts with their corresponding key numbers and model numbers.
Instructions on what information to provide when ordering replacement parts.
