EasyManua.ls Logo

Emerson CF921ORB00 - User Manual

Emerson CF921ORB00
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Part No. F40BP74330000 Form No. BP7433
ETL Model No.: CF921
READ AND SAVE THESE INSTRUCTIONS
Ceiling Fan Owner's Manual
CF921BS00
CF921CK00
CF921GES00
CF921ORB00
Model Numbers
AVANT ECO
™
Net Weight: 18.7 Lbs.
54”, 60” or 72” Fan Blades
Not Included

Table of Contents

Questions and Answers

  • L
    Luke PerryJul 31, 2025
    How to fix a noisy Emerson CF921ORB00 Fan?
    • J
      Julie WalkerJul 31, 2025
      A noisy Emerson Fan could be due to: * Blades not attached to the fan. Ensure the blades are properly attached before operating the fan. * Loose screws in the motor housing. Check and tighten all screws in the motor housing, but avoid over-tightening. * Loose screws securing the fan blade flanges to the motor hub. Tighten these screws. * Wire connectors inside the switch housing rattling. Ensure wire connectors are not rattling against each other or the switch housing's interior wall. * Loose screws holding the blades to the flanges. Securely tighten these screws.
  • C
    Charles JonesAug 10, 2025
    Why won't my Emerson CF921ORB00 Fan start?
    • J
      Justin FergusonAug 11, 2025
      Your Emerson Fan might not start due to several reasons: * A blown fuse or circuit breaker. Check both the main and branch circuit fuses or circuit breakers. * Loose power line connections to the fan, or loose switch wire connections in the switch housing. Inspect and tighten these connections. * A dead battery in the remote control transmitter. Replace the battery, and ensure the red indicator light illuminates when a button is pressed. * Incorrect code switch positions in the remote control receiver and transmitter. Verify that the code switches are in the same positions and reset if needed.
  • J
    Jennifer DownsAug 20, 2025
    What to do if my Emerson CF921ORB00 Fan wobbles excessively?
    • D
      Dennis JonesAug 20, 2025
      Excessive wobbling in your Emerson fan can be caused by: * A loose setscrew in the motor coupling. Make sure to securely tighten both setscrews. * A loose setscrew in the hanger ball/downrod assembly. Tighten this setscrew. * Loose screws securing the fan blade flanges to the motor. Check and tighten these screws. * Fan blade flanges not seated properly. Ensure they seat firmly and uniformly to the motor surface, retightening the flange screws if needed. * The hanger bracket and/or ceiling outlet box is not securely fastened. Tighten the hanger bracket screws to the outlet box, and/or secure the outlet box. * Fan blades out of balance. Try interchanging an adjacent blade pair to redistribute the weight.

Summary

Safety Instructions

Additional Safety Instructions for Installation

Provides safety guidelines for wiring, electrical codes, and mounting.

EMERSON QUICK START GUIDE

Installation of Downrod

Steps to install the downrod onto the motor coupling with pin and clip.

Installation of Ceiling Fan

Steps for installing the coupler cover and hanger ball onto the downrod.

Installation of Blade Assembly

Instructions for mounting blade flanges to blades and attaching to the motor.

Installation of Switch Housing

Steps to position and secure the switch housing assembly onto the plate.

Hanging Your Ceiling Fan

Instructions for disconnecting power and attaching the hanger bracket.

Wiring Ceiling Fan

Programming and Operation of Remote Control

Unpacking Instructions

Electrical Requirements

How to Put Your Ceiling Fan Together

How to Hang Your Ceiling Fan

How to Wire Your Ceiling Fan

Installation of Remote Control Battery

Setting Operating Frequency of Remote Control

Operation of Your Remote Control

Optional Accent Kit Installation

Maintenance

Accessories

Trouble Shooting

Repair Parts Listing

LIMITED WARRANTY

Emerson CF921ORB00 Specifications

General IconGeneral
Model NumberCF921ORB00
CategoryCeiling Fan
TypeIndoor Ceiling Fan
BrandEmerson
FinishOil Rubbed Bronze
Blade Span52 inches
Number of Blades5
Motor TypeAC Motor
Light Kit IncludedNo
Remote Control IncludedYes
Blade MaterialWood
ControlsRemote Control
WarrantyLimited Lifetime
MountingDownrod

Related product manuals