To Next PageTo Next PageWhat to do if my Emerson ASHLAND CF717BS00 Fan will not start?
If your Emerson Fan isn't starting, there are several things to check: * First, examine the main and branch circuit fuses or circuit breakers. * Next, check the line wire connections to the fan and the switch wire connections in the switch housing for any looseness. * Finally, ensure the reversing switch is fully engaged to one side, not in a neutral position.
Why does my Emerson Fan wobble excessively?
An Emerson Fan might wobble excessively due to several reasons: 1. Loose setscrews in the motor coupling. Tighten them securely. 2. A loose setscrew in the hanger ball/downrod assembly. Ensure it's tightened. 3. Loose screws securing fan blades to the flywheel. Check and tighten these screws. 4. An insecurely fastened hanger bracket or ceiling outlet box. Tighten the hanger bracket screws to the outlet box and/or secure the outlet box itself. 5. Fan blades being out of balance. Try interchanging an adjacent blade pair to redistribute the weight.
How to fix a noisy Emerson Fan?
If your Emerson Fan sounds noisy, consider these potential causes: * Ensure the blades are properly attached to the fan. * Check all screws in the motor housing are snug (not over-tight). * Inspect wire connectors inside the switch housing to make sure they are not rattling against each other or the housing's interior wall. * Tighten the screws holding the blades to the flywheel securely.
What to do if the lamps on my Emerson ASHLAND CF717BS00 will not illuminate?
If the lamps on your Emerson Fan aren't lighting up, try the following: * First, turn off the electricity at the fuse box or breaker panel and check the receiver electrical connectors for proper installation. * If that doesn't work, the lamps may be burnt out. With the electricity off, replace the lamp with a new 60W maximum lamp. * If the lamps turn on and then off, the built-in circuit breaker is tripping. Make sure each lamp is 60W maximum.
General| Brand | Emerson |
|---|---|
| Model | ASHLAND CF717BS00 |
| Type | Ceiling Fan |
| Blade Span | 52 inches |
| Reversible Motor | Yes |
| Finish | Brushed Steel |
| Blade Material | Wood |
| Light Kit Included | No |
| Warranty | Limited Lifetime |
| Motor Speed | 3-speed |
General safety guidelines for operating and cleaning the ceiling fan.
Safety guidelines specific to the installation process of the ceiling fan.
Lists all components included in the fan package for unpacking.
Lists all hardware and small parts included in the fan package.
Details the required electrical supply voltage, circuit, and outlet box specifications.
Steps for removing and preparing the hanger ball and downrod for assembly.
Routing motor lead wires and securing the downrod with a clevis pin.
Securing the downrod with setscrews and installing the motor coupler cover.
Routing motor leads through the ceiling cover and placing the cover on the downrod.
Reinstalling the hanger ball onto the downrod and tightening the setscrew.
Measuring, cutting, and stripping fan motor leads for connection.
Removing screws and applying a gasket to the motor housing for close-to-ceiling mount.
Attaching the ceiling cover to the motor housing using screws.
Positioning the hanger bracket onto the outlet box screws using T-slots.
Securing the hanger bracket firmly to the outlet box.
Hanging the fan assembly onto the hanger bracket using the hanger ball groove.
Hanging the fan assembly to the hanger bracket via the ceiling cover for close-to-ceiling mount.
Connecting the green grounding leads from the hanger ball/bracket to the supply ground.
Connecting fan motor wires (white, black, blue) to the supply wires.
Loosening and removing screws from the hanger bracket to prepare for cover installation.
Lifting and turning the ceiling cover to engage slots and securing with screws.
Removing hub spacers and mounting blade flanges to fan blades.
Attaching the blade assemblies to the motor hub using screws.
Connecting the light kit assembly connector to the motor connector.
Attaching the light kit to the switch cup plate and installing light bulbs.
Positioning the fan speed control pull chain through the light kit fitter plate.
Installing the glass shade and bowl cap, securing with finial nut.
Cutting pull chains to length and attaching wood pendants.
Restoring power, testing light/fan, and explaining the reversing switch function.
Instructions for periodic cleaning of the ceiling fan to maintain its finish.
Mentions available accessories like fan/light controls and downrod extension kits.
Addresses common operational issues like fan not starting, noise, or wobbling.
Troubleshoots issues related to the fan's lighting not illuminating or cycling.
Lists all available repair parts with their corresponding keys and model numbers.
Provides instructions on how to order replacement parts, including required information.
Details what the limited warranty covers and its duration for the ceiling fan.
Explains how to get warranty service, what is not covered, and limitations.
Outlines warranty limitations, liability, and how state/provincial laws apply.
