CHD200G series Fingerprint Reader
2
red LED light and blue LED light blink once; swipe card, buzzer beep once, red LED light and
blue light blink once.
Standard: Fingerprint Enterprise Standard, Enterprise Standard No.: Q/NBL007-2006.
Others:
Keypad: 12 keys;
Communication: RS485, use for fingerprint download or upload;
Communication speed: 9600/19200/38400/115200 BPS, 38400BPS as default;
Net ID: 1-254 set by software, default as 1, using 0 to do any operation;
Output Interface: Wiegand, OC output;
Output format: 26bits /28bits /44 bits optional;
Communication distance: Wiegand less than 60m, RS485 less than 1200m;
Sensitivity Grade: FRR 1.4%, FAR 0.00001%;
User Capacity: maximum 5000 users;
Fingerprint Capacity: 5000;
Fingerprint working mode: 1: N identification: support fingerprint, card, keypad
1:1 identification: support keypad ID + fingerprint, card + fingerprint
Password function: fingerprint + password, card + password, ID + password
Fingerprint identify time: ID + fingerprint / card + fingerprint, less than 1s
Fingerprint only work mode: save 5000 fingerprints, identify time less than 3s;
Fingerprint scan valid area: 16mmX14mm±5%
3. Functions and Operation
3.1 Functions
3.1.1 Working Mode
Support to use software to set Device working mode, output Wiegand format, In & Out
direction, Wiegand output code method.
3.1.2 Keypad functions
When the case of no associate keypad mode, keypad output support 4/8 Wiegand mode
3.1.3 ID/IC card reading Fucntions
Without associated fingerprint situations, support Wiegand 26/44 format output.
3.1.4 Fingerprint identify mode
Support fingerprint only, ID + fingerprint, card + fingerprint identification modes.
3.1.5 Stress fingerprint alarm functions
Once user input stress fingerprint, output alarm information through Wiegand 28/29 mode.
3.1.6 Fingerprint output
Fingerprint ID output format support BCD code and Hexadecimal output
3.1.7 Fingerprint register
Using software to register, maximum fingerprint eigenvalue as 1664 bytes. Through RS485,
maximum user 6000 users.