Emerson CKD2328 - SETTING THE WAKE-UP TIME

15
SETTING THE WAKE-UP TIME
1.) Depress and hold the ALARM SET button. The display will change from clock
time to wake-up time and show “7:00 ”. Repeatedly press the HOUR button
to adjust the display to the correct wake-up hour, AM or PM.
2.) Continue to depress the ALARM SET button and repeatedly press the MINUTE
button to adjust the display to the correct wake-up minute.
3.) When the display shows the desired wake-up time release all the buttons.
To check the wake-up time just press the ALARM SET button at any time. The
display will show the wake-up time as long as the ALARM SET button is depressed.
CKD2328_2330_B091103.p65 11/9/2003, 14:5115