14
5.) Two dashes “– –” flash while the player reads the table of contents of the disc.
The display will show the total number of tracks for a few seconds and then
return to the correct time.
Note: If the disc is inserted incorrectly, or if the disc is badly scratched
and cannot be read by the player, “no” will appear on the display for a few
seconds, and then the display returns to the correct time.
6.) Press the button to begin playback.
The display will briefly show “01” (Track 01) and playback on track 01 begins.
After a few seconds the display returns to the correct time.
Press the DISPLAY button to return to Track number again for few seconds.
7.) To Pause briefly during playback press the button.
The track number flashes briefly and the sound stops, but the disc continues
to spin.
Press button again to cancel pause and resume playback.
8.) To skip forward or backward to other tracks repeatedly press the or
buttons until the desired track number appears in the display. Playback will
begin on the selected track.
9.) To stop playback at any time press the Stop button. After the last track hass
played the disc stops automatically. Open the CD door and remove your disc.
To Next Page
Loading...
Need help?
General
