18
7.) After you have programmed all the desired tracks press the button to begin
programmed playback.
The PROGRAM indicator stops flashing and remains ‘On’. Playback will begin
on the first track you programmed and continue until all programmed tracks
have been played.
Notes:
• After all programmed tracks have played the player stops but the program
remains in the memory.
Press the PROGRAM button and then the button to begin programmed
playback again.
• To clear the program from the memory after the disc stops, press the
PROGRAM button and then press the Stop button.
Opening the CD door, pressing the POWER/ALARM OFF button to shut
the unit ‘Off’, or by switching to other function also clears the program.
Program Repeat Playback
You may use the Program and Repeat features together to repeat a programmed
sequence of tracks.
Simply enter the desired tracks in the program memory as described on page 17,
then press the P-MODE button twice to select ‘All Tracks Repeat’.
The PROGRAM and REPEAT indicators will both
come ‘On’.
Press to begin Program Repeat playback.
To Next Page
Loading...
Need help?
General
