Emerson CKS9051 - Important Product Information; Key Notes and FCC Compliance

Congratulations!
And thank you for purchasing the SmartSet® Clock Radio from Emerson.
SmartSet® is the world’s first and only LED clock radio that will automatically set
itself to the correct ‘Year’, ‘Month’, ‘Date’, ‘Day’, and ‘Time’ as soon as you plug it in.
The only thing you have to do is tell the SmartSet® what time zone you are in, and
the built in computer does everything else for you immediately. And not only the
first time, but every time the power is interrupted as well.
Someday all clocks and clock radios may be this smart. But today the technology
is only available from Emerson.
We're sure you'll be happy and amazed by your SmartSet® Clock Radio, and that it
will give you many years of enjoyment and dependable service.
Once again, all of us at Emerson thank you for your purchase.
IMPORTANT NOTES
+ Avoid installing this unit in places * Operate controls and switches as
exposed to direct sunlight or close to described in the manual.
heat radiating appliances such as œ Before turning on the power, make
electric heaters, on top of other stereo certain that the AC power cord is
equipment that radiates too much properly installed.
heat, places lacking ventilation or * When moving the set, be sure to first
dusty areas, places subject to disconnect the AC power cord.
constant vibration and/or humid or
moist areas.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.