D6.3.4/0715-0716/E 5
DWM Copeland designation (old models)
NOTE: For more information, please refer to Technical Information D7.4.3 “Copeland™
semi-hermetic compressor model designation”.
2.4 Nameplate information
All important information for identification of the compressor is printed on the nameplate.
The type of refrigerant used should be stamped on the nameplate by the installer.
The date of production consists of the year and week of production. In addition the year and
month of production are shown as part of the serial number (Jan = A, Feb = B, … Dec = L).
The mutual nameplate on TWIN compressors only indicates the model and the year of
manufacturing. All other details should be taken from the individual compressor nameplates.
2.4.1 DWM Copeland designation (old models)
DK, DL, D2S D4S, D4D, D6S/T, D6D, D8S, D8D
D2D, D3D, D3S
To Next Page
Loading...
