Emerson COPELAND ZX Series - Controller Initialization Message

21
21
Bin Files Number Range
Step Action Phenomenon and Description
1
Press “
” + “ ”
Enter menu to select “PAr” (parameter) or “rtC”
2
Press “
” or “ ”
Select “rtC”
3
Press “
”
“n01” , minute
“n02” , hour
“n03” , day
“n04” , month
“n05” , year (last two digits)
4
Press “
”
Display actual value
5
Press “
” or “ ”
Modify the value
6
Press “
”
Press“SET” : the value will ash for 3 second, then move to the next value
7
Press “
” + “ ”
Exit to “rtC”
8
Press “
” + “ ”
Exit to main menu (or wait for 120 seconds and exit atomically)
After installation and initial power on, it is critical to double check the parameters below.
RTC (Real Time Clock) Setting
Bin Number Range Family
1 to 200 ZX
301 to 500 ZXL
501 to 600 ZXD
800 to 806 Service Part
Step Action Phenomenon and Description
1 Power on controller All LEDs will light up for 3 seconds.
2
Firmware version will be displayed for 3 seconds.
3
Parameter setting le (bin le number) identier will be displayed for 3 seconds.
4
Normal display (actual suction temperature will be displayed on ZXD unit, condensing
temperature will be displayed on ZX/ZXL unit)
Controller Initialization Message