Emerson COPELAND ZX Series - Installation: Handling and Weight; Condensing Unit Handling and Storage

12
14
Installation
Copeland ZX condensing units are delivered with a holding charge of neutral gas. The condensing unit should be located in such a place
to prevent any dirt, plastic bag, leaves or papers from covering the condenser and its fins. The unit must be installed without restricting
the airflow. A clogged condenser will increase the condensing temperature, thus reduce the cooling capacity, and lead to a high-pressure
switch tripping. Clean the condenser fins on a regular basis.
ZX ZXD ZXL
Model Weight (kg) Model Weight (kg) Model Weight (kg)
ZX020BE 76 ZXD040BE
2
104 ZXL020BE 79
ZX025BE 79 ZXD050BE
3
112 ZXL025BE 81
ZX030BE 79 ZXD060BE
4
114 ZXL030BE 81
ZX040BE
1
91 ZXD075BE
5
122 ZXL035BE 93
ZX050BE 108 ZXL040BE 93
ZX060BE 112 ZXL050BE 106
ZX075BE 118 ZXL060BE 116
ZX076BE 121 ZXL075BE 121
Net Weight
Notes:
1
100 kg for models under 60 Hz TF5/7 and 50 Hz PFJ
2
109 kg for models under 60 Hz TF7
3
117 kg for models under 60 Hz TF7
4
121 kg for models under 60 Hz TF7
5
127 kg for models under 60 Hz TF7
Transport and Storage
Move ZX/ZXD/ZXL unit only with appropriate mechanical or handling equipment according to weight. Keep in the upright position. Do
not stack single boxes on top of each other without pallet in any case. Keep the packaging dry at all times.
Condensing Unit Handling