1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx iProCHILL 204/205
0= if configured as temperature control
1= If the probe configured for control of the anti-freeze - boiler and Ar10 = 0
2= If the probe configured for control of the auxiliary relay output
3= With manual reset alarm
4= Compressors off with just n° 1 water pump configured or with n° 2 water pumps configured and both with
circuit breaker alarms
5= boiler heaters off only with n° 1 water pump configured or with n° 2 water pumps configured and both
circuit breaker alarms (in this case the boiler heaters are only activated by the anti-freeze set protecting the
evaporator)
To Next Page
Loading...
